 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MA4VAT907-1061T High IIP3 PIN Diode Variable Attenuator 0.8 - 1.0 GHz Features * * * * * Bandwidth: 0.80 GHz to 1.0 GHz 1.0 dB Insertion Loss, Typical 12 dB Return Loss, Typical 25 dB Attenuation, Typical 50 dBm Input IP3, Typical (1MHz Offset, @+0dBm Pinc) * 0 - 3.0 Volts Control Voltage @3.3mA Typical * RoHs Compliant Rev. V5 Extra Features * Covers the following Bands: * GSM * AMPS * Usable Bandwidth: 0.60 GHz to 1.20 GHz * 1.5 dB Insertion Loss, Typical * 1.8:1 VSWR, Typical * 18.5 dB Attenuation, Typical SOIC-8 PIN Configuration (Topview) PIN 1 2 Function DC1 GND GND RFin/out RFout/in GND GND DC2 Comments Description and Applications M/A-COM's MA4VAT907-1061T is a HMIC PIN Diode Variable Attenuator which utilizes an integrated 90 degree 3dB hybrid with a pair of Silicon PIN Diodes to perform the required attenuation function as D.C. Voltage (Current) is applied. This device operates from 0 to 2.77Volts at 3.0mA typical control current for maximum attenuation. The user can add external biasing resistors to the bias ports for higher voltage requirements as required. M/A-COM's MA4VAT907-1061T PIN Diode Variable Attenuator is designed for AGC Circuit Applications requiring: * Lower Insertion Loss * Lower distortion through attenuation * Larger dynamic range for wide spread spectrum applications 3 4 5 6 7 8 Symetrical as RF Input/Ouput Symetrical as RF Input/Ouput Absolute Maximum Ratings @ +25 C 1,2 Parameter Operating Temperature Storage Temperature Junction Temperature RF C.W. Incident Power Reversed Current @ -30 V Control Current Maximum Ratings -40 C to +85 C -65 C to +150 C +175 C +33 dBm C.W. 50nA 50 mA per Diode 1. All the above values are at +25 C, unless otherwise noted. 2. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT907-1061T High IIP3 PIN Diode Variable Attenuator 0.8 - 1.0 GHz Electrical Specifications @ +25 C Parameter Frequency Band Unit Min Typ Max Rev. V5 Low Loss RF Parameter (Pin = +10 dBm, except for P1dB, & IP3) Insertion Loss Input Return Loss Output Return Loss P1dB Input IP3 Control Voltage 0.80 GHz--1.00 GHz dB dB dB dBm dBm V 11 11 30 45 1.0 12 12 49 0 V @ OuA 1.2 - Maximum Attenuation RF Parameter (Pin = +10 dBm, except for P1dB, & IP3) Maximum Attenuation Input Return Loss @ Max Attenuation Output Return Loss @ Max Attenuation Input IP3 Control Voltage @ Max Attenuation Current@ Max Attenuation Bias = 3.0V 0.80 GHz--1.00 GHz dB dB dB dBm V mA 18.5 15 15 36 2.5 24 21 21 39 3.0 V @ 3.35 mA 4.5 Typical RF Performance Over Industry Designated RF Frequency Bands Band Freq (MHz) RX AMPS TX 869-894 0.9 22 12 50 824-849 I. Loss (dB) 0.9 Att. (dB) 22 R. Loss (dB) 12 IIP3 (dBm) 50 Phase -Relative(Degree) -15 RX GSM TX 880-915 925-960 1.2 1.2 20 20 11 11 50 -20 50 3. All are typical values only. 4. Relative phase is the measured Insertion Phase difference between Insertion Loss and 15 dB Attenuation. (Please refer to the plots below) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT907-1061T High IIP3 PIN Diode Variable Attenuator 0.8 - 1.0 GHz Plots of Typical RF Characteristics @ +25 C Typical Insertion Loss & Attenuation Plot MA4VAT907-1061 Typical Attenuation 0 -5 0 -5 Rev. V5 Typical Attenuation vs Voltage MA4VAT907-1061 Attenuation vs Control Voltage Attenuation (dB) Attenuation (dB) -10 -15 -20 -25 -30 0.600 0.700 0.800 0.900 1.000 1.100 1.200 -10 -15 -20 -25 -30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) 0V/0mA 1V/0.55mA 1.28V/0.90mA 1.87V/1.72mA 2.33V/2.37mA 2.75V/2.95mA 3.0V/3.35mA Bias Voltage (V) 800MHz 900MHz 1000MHz Typical Return Loss @ All Attenuation Levels Plot MA4VAT907-1061 Typical Input Return Loss 0 Typical IIP3 vs Attenuation Plot MA4VAT907-1061 Typical IP3 vs Bias Voltage @900MHz (1MHz Offset, +10dBm Pin) 70 -5 60 50 Attenuation (dB) -10 IP3 (dBm) -15 -20 -25 -30 0.600 0.700 0.800 0.900 1.000 1.100 1.200 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Bias Voltage (V) Frequency (GHz) Typical Relative Phase Shift Per Attenuation (Voltage) MA4VAT907-1061 Relaive Phase vs Control Voltage 90 70 50 30 10 -10 -30 -50 -70 -90 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Relative Phase (Degree) For Reference ONLY: * Insertion Loss * 5dB Attenuation * 10dB Attenuation * 15dB Attenuation * 20dB Anttenuation * Max Attenuation = 0.00 V = 1.30 V = 1.94 V = 2.36 V = 2.67 V = 2.77 V @ 0.00 mA @ 0.95 mA @ 1.78 mA @ 2.42 mA @ 2.90 mA @ 3.00 mA Bias Voltage (V) 800MHz 900MHz 1000MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT907-1061T High IIP3 PIN Diode Variable Attenuator 0.8 - 1.0 GHz Package PIN Designation, External Components, and Equivalent Circuit Rev. V5 Cbias Lbia s Control Curren t Rbias RF I N/OUT Cblock Lbia s Cbias Cblock RF OUT/ IN External Bias Components Rbias= 680 Ohms ( 3.0 V @ 3.5 mA ) Lbias= 150 nH Cbias =100 pF Cblock =100 pF 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4VAT907-1061T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |